2003 Past Project Experience

  1. VICAT – BASTAS BASKENT CIMENTO SAN. TIC. A.S. / 2003

    Bastas Cement Plant

3.1. General revision works for clinker cooler.

3.2. Rotary Kiln Unit: reparation of the inlet seal.

3.3. Rotary Kiln Unit: renovation of the outlet seal.

 

 

  1. OYAK UNYE CIMENTO SAN. TIC. A.S. / 2003

    Unye Cement Plant

4.1. Fabrication and installation of the steel construction of the stock

hall unit.

 

  1. SET CIMENTO SAN. TIC. A.S. / 2003

    Trakya Cement Plant

5.1. General revision works for electrostatic precipitators for both clinker cooler and raw mill.

 

  1. BPB DOGAN ALCI FABRIKASI ( AYMAS A.S. ) / 2003

    Hasanoglan Plaster Plant

6.1. Renovation work for the outlet seal ring of the rotary kiln no II.

 

  1. ISIKLAR SARAPCILIK SAN. VE TIC. A.S. / 2003

                Kalecik Plant

7.1. Fabrication and Installation works of the tanks for waste water treatment facility.

 

  1. BURSA CIMENTO FABRIKASI ( CIMTEK A.S. ) / 2003

    Bursa Cement Plant

8.1. Revision works for the electrostatic precipitator of the clinker

cooler.

 

  1. DENIZLI CIMENTO SAN. TIC. A.S. / 2003

    Denizli Cement Plant

9.1. Fabrication, installation and insulation works for the hot gas line of the  cogeneration unit.

9.2. Revision works for the hoppers of the raw metarials and polyurethane coating works (Electrostatic precipitator of the raw mill number 1 – 2 ).

 

  1. BPB DOGAN ALCI FABRIKASI  / 2003

    Hasanoglan Plaster Plant

10.1. Renovation of the outlet seal ring for the rotary kiln number I.

 

 

 

  1. VICAT – KONYA CIMENTO SAN. TIC A.S. / 2003

    Konya Cement Plant

11.1. Fabrication of the buckets for the bucket elevator for the raw mill.

11.2. Fabrication of the kiln shell ( Ø 4200 x 825 mm outlet side )

for the rotary kiln number II as well as the replacement of it.

 

  1. YIBITAS LAFARGE ORTA ANADOLU CIMENTO SAN. TIC. A.S. / 2003

    Corum Cement Plant

12.1 Revision of the kiln shell of the rotary kiln.

 

  1. ASKALE CIMENTO SAN. TIC. A.S. / 2003

    Askale Cement Plant

13.1. Fabrication of the chair pad and support plates for the tyre of the rotary kiln.

13.2. Fabrication of the caterpillar of the pan conveyor for the coal feeding.

13.3. Fabrication of the bucket for the Loesche return elevator.